LM-Q560P THERMAL & OPTICAL DUAL-SPECTRUM PTZ CAMERA PRODUCT INTRODUCTION
Product Overview
LM-Q560P is a dual-spectrum PTZ camera integrating uncooled thermal imaging module and 32x optical zoom visible light module. It supports long-distance temperature measurement, fire detection, multi-channel intelligent perimeter analytics, 360° endless pan rotation, IP66 outdoor protection and IEEE802.3bt PoE++ power supply. Equipped with triple-stream encoding, SD local storage and multi-user remote access, it is widely applied in border defense, forest fire prevention, factory safety, power station monitoring and large-scale perimeter security scenarios.
Core Product Features
- Dual-Spectrum Design 384×288 uncooled thermal detector + 4MP 32x optical zoom visible lens, three optional thermal focal lengths for variable detection distance
- Temperature Measurement & Fire Alarm Real-time temperature reading range -20℃~150℃, supports point/line/area temperature rules and dynamic fire detection with up to 10 fire targets
- Full-Range PTZ Rotation 360° endless pan, -10°~156° tilt, proportional zoom speed, 360 presets, 8 cruise routes and 8 patrol tasks, supports 3D intelligent positioning
- Dual-Channel AI Analytics Optical channel supports human/vehicle classification, cross-line & intrusion detection, face capture and target counting; Thermal channel supports fire warning and thermal perimeter detection, AI functions run simultaneously on both sensors
- Triple-Stream Encoding H.265+/H.265/H.264+/H.264/MJPEG multi-codec, independent resolution and frame rate configuration for main/sub/third stream
- Outdoor Industrial Grade IP66 waterproof enclosure, 200~300m IR night vision, wide working temperature -30℃~60℃, PoE++ IEEE802.3bt and AC/DC 24V dual power supply
Full Technical Parameters
| Category | Parameter Item | Specification |
|---|---|---|
| Thermal Module | Detector Type | 12µm 384×288 Uncooled Infrared Focal Plane Detector |
| Response Waveband | 8 μm – 14 μm | |
| NETD | ≤35mK(@25°C, F#=1.0) | |
| Iris Type | Fixed Iris | |
| Optional Thermal Lens & FOV | 9.1mm@F1.0 (28.4°×21.5°) / 19mm@F1.0 (13.8°×10.4°) / 25mm@F1.0 (10.5°×7.9°) | |
| Human DRI Distance (0.75m target) | 9.1mm: D379m/R95m/I47m 19mm: D792m/R198m/I99m 25mm: D1042m/R260m/I130m |
|
| Vehicle DRI Distance (2.3m target) | 9.1mm: D1163m/R291m/I145m 19mm: D2428m/R607m/I303m 25mm: D3194m/R799m/I399m |
|
| Color Palettes | Black hot, white hot, rainbow, iron oxide red, etc. | |
| Visible Light Module | Image Sensor | 1/2.8″ CMOS |
| Max Resolution | 2560×1440 (4MP) | |
| Electronic Shutter | 50Hz: 1/25s ~ 1/25000s; 60Hz: 1/30s ~ 1/30000s | |
| Minimum Illumination | Color: 0.01 Lux @ F1.65 AGC ON; B/W: 0.002 Lux @ F1.65 AGC ON; 0 Lux with IR | |
| Lens Zoom | f=4.8-154mm, 32x optical zoom, F1.65-F4.70 auto/manual aperture | |
| Visible FOV | H:59.38°~2.28°; V:35.74°~1.29°; D:66.28°~2.61°, zoom speed ~4.4s | |
| Image & Encoding | Video Compression | H.265+/H.265/H.264+/H.264/MJPEG |
| H.264 Profile | Baseline / Main / High Profile | |
| Bitrate Control | VBR / CBR, 128Kbps ~ 8Mbps | |
| Supported Resolutions | Optical: 4MP/1080P/720P/D1/CIF/480×240 Thermal output:720P/D1/CIF/480×240 |
|
| Stream Modes | Main Stream + Sub Stream + Third Stream, independent frame rate & resolution for thermal/optical channels | |
| Image Adjustment | ROI, saturation, brightness, hue, contrast, WDR, sharpness, digital NR; adjustable via Web & Client | |
| Audio Coding & Overlay | G711A/U; Thermal image supports temperature value overlay | |
| PTZ Function | Pan & Tilt Range | Pan: 360° endless; Tilt: -10° ~ 156° |
| Rotation Speed | Pan:0.1~320°/s; Tilt:0.1~240°/s, preset speed max 320°/240°/s | |
| Task Capacity | 360 presets, 8 cruises (16 presets each), 8 patrols (10min+ recording each) | |
| Smart PTZ Features | Proportional zoom, 3D positioning, PTZ coordinate display, power-off memory | |
| Auto Action Modes | Preset / Cruise / Patrol / Random Scan / Boundary Scan, schedule task support | |
| PTZ Interface | No RS485 | |
| Hardware Interface | Network | RJ45 Ethernet |
| Audio & Alarm | 1CH Audio In / 1CH Audio Out; 1CH Alarm Input / 1CH Alarm Output | |
| Storage & Reset | Built-in micro SD card slot (max 256GB), hardware reset button | |
| Video Output | Not Supported | |
| Intelligent & Alarm | Temperature Measurement | -20℃ ~ 150℃, accuracy ±8℃ or ±8%; 10 temperature rules (point/line/area each max 10) |
| Fire Detection | Dynamic fire detection, supports up to 10 fire targets with over/low temperature alarm | |
| Smart Alarm Events | Motion detection, SD card error/full, IP conflict, cable disconnect, video/audio abnormality | |
| Dual-Channel AI Analytics | Optical: human/vehicle classification, cross-line/intrusion detection, face detection, line counting Thermal: fire alarm, thermal perimeter detection; AI runs simultaneously on both channels |
|
| General Security Functions | Digital watermark, IP filter, video privacy mask, heartbeat, password protection | |
| Network & Access | Remote Monitoring | Web Browser, NVMS, NVR, Mobile APP; max 10 concurrent online users, multi-stream transmission |
| Network Protocols | UDP, IPv4, IPv6, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP, RTMP, SNMP, 802.1x, UPnP, HTTPS, HTTP POST, P2P, QoS | |
| Standard & Storage | ONVIF supported; Network remote storage + local micro SD storage | |
| Power & Physical | Power Supply | AC24V / DC24V 2500mA, IEEE802.3bt PoE++ |
| Power Consumption | Average 24W, Max 35W (IR module consumes 12W) | |
| IR Night Vision Distance | 200 ~ 300m | |
| Protection & Temp | IP66 Ingress Protection; Working Temp: -30℃ ~ 60℃, Humidity ≤95% non-condensing | |
| Dimension & Weight | Φ302 × 197 mm, Net weight approx. 3KG | |
| Installation & Certification | Installation Method | Wall mounting, Ceiling mounting |
| Certifications | CE, FCC |
Applicable Scenarios
- Forest & Grassland Fire Prevention Long-distance thermal imaging fire early warning, all-day temperature monitoring without visible light
- Border & Perimeter Defense Dual-spectrum AI detection, filter invalid alarms from vegetation, recognize human & vehicle intrusions day and night
- Power Station & Substation Equipment temperature measurement, overheating alarm, unattended thermal inspection
- Factory & Chemical Park Real-time fire detection, multi-region temperature abnormal alert, 360° full coverage PTZ monitoring
- Large Industrial Zone & Port Long-range dual-spectrum monitoring, multi-user remote management, PoE wired deployment for outdoor poles
Installation Caution: Keep thermal and optical lens windows clean to avoid fogging or dirt affecting detection accuracy. Outdoor installation must equip reliable lightning protection and grounding. Do not block IR fill light window. Regularly check SD card storage status and calibrate thermal temperature measurement for long-term stable use.
Note: All relevant information such as pictures, parameters and data provided on the website are for reference only. Please refer to the actual product received for specific specifications, appearance and performance.
Please contact our sales team for the latest details.
Please contact our sales team for the latest details.
